LIP-8012D & LIP-8024D User Guide
To activate a queue if the selected/dialed line is busy:
•
Select the desired CO/IP line button; when the busy
notification is returned, press the MSG button,
•
Return to an idle state by going on-hook; when the line
is available, the Station will be notified (ringing).
To enter an Account Code before the call:
•
Lift the handset,
•
Press the assigned
•
Dial the Account Code (1-12 digits),
•
Press *, Intercom dial tone is heard,
•
Place the CO/IP call as normal.
To enter an Account Code during a call:
•
Press the assigned
•
Dial the Account Code (1-12 digits),
•
Press *.
To activate Temporary COS:
•
Press
•
Dial 21 (User Program code),
•
Press
4.2.2 Waiting for the next available CO/IP line
If all the lines connected to your system are busy, you
will receive an All Trunks Busy signal. You may request
to be notified when a line becomes free.
4.2.3 Account Codes: Tracking External calls for billing
In some cases, you or your company may desire to
track calls for billing or other purposes. You may enter
an Account Code, which is output from the system to a
printer in the SMDR report. You may have an
Flex button (refer to
Code
buttons).
4.2.4 Disable dialing from your phone
You can temporarily 'Lock' your phone by activating
Temporary COS, which will disable all dialing from the
phone. To deactivate Temporary COS you must enter
the station's Authorization code.
,
/
TRANS
PGM
.
/
HOLD
SAVE
Assigning features to Flex
button,
ACCOUNT CODE
button,
ACCOUNT CODE
28
Issue 1
Account
August, 2008