Bluetooth Hf Call Waiting - iPECS LIP-9070 User Manual

LIP-9070
When the Bluetooth HFP application is activated by
touching the HFP icon, the HFP call screen appears.
Below the Notification and Status bar, the screen
displays information for the connected Bluetooth AG
including the device name, service name and mobile
number. To the left is the connected caller id and icon.
To the right are the audio controls for the speaker and
microphone of the LIP-9070, a dial pad and the call
controls.
Note
°
A warning message will appear if the
Bluetooth HF device is not connected or
disconnects unexpectedly.
°
As a default, the Bluetooth Handsfree icon is not assigned to a Launcher screen or the Apps Dock. To
activate the application the icon must be added to a Launcher screen or the dock.
°
The redial feature may not be available on mobile phone.
°
Smart Phones employ different noise reduction and automatic gain control algorithms that may affect the
voice quality when switching to the Bluetooth HFP operation.
11.2.1

Bluetooth HF Call Waiting

The Bluetooth AG will deliver caller id to the LIP-
9070 over the Bluetooth connection. The LIP-9070
will compare the caller id with the Contacts and, if
matched, the Contact name and icon display.
Should a second call arrive, the Bluetooth device
sends information for the waiting call. The caller id
is displayed, as shown here. The user may select
to ignore the call, place the existing call on hold and
answer the new call, or end the existing call and
answer the new call.
If the existing call is placed on hold and the new call
answered, the user can switch between the two
calls by touching the Swap button.
54
iPKTS
User Guide