Leaving A Message Wait Indication; Leaving A Voice Mail - iPECS LIP-9000 Series User Manual

next station by dialing the last digit of the Intercom number.
If you are the Attendant or Secretary, you may activate Intrusion.
Camp-On allows you to wait off-hook for the called station to answer.
Callback allows you to hang-up, and when the busy station returns to an
idle state, the system will call your Station; after you answer the callback,
the system will call the previously busy station.
Voice Over allows you to make an announcement to the busy user by
combining your voice with the other party connected to the busy user.
To Camp-On (wait off-hook) for a busy station:
 Press * and await answer.
To request a Callback (wait on-hook) for a busy station:
 Press the MSG button and hang-up.
To make a Voice Over announcement to a busy station:
 Dial #.
 After the Splash tone is heard, begin speaking.

4.1.2 Leaving a Message Wait Indication

If the called user does not answer or is in DND mode, you may leave a
Message Wait indication. The called user will receive a Message Wait
indication; the message icon will be displayed.
To activate Message Waiting:
 When calling a station that is busy or in DND mode, press the MSG
button and hang-up.

4.1.3 Leaving a Voice Mail

If the called user does not answer, you may leave a Voice message in the
user's mailbox. The called user will receive a Message Wait indication; the
message icon will be displayed.
To Leave a Voice Mail Message Waiting:
 When calling a station that does not respond, press the MSG button.
 Await the user's mailbox greeting.
 At the tone, leave your voice message and hang-up.
26 LIP-9000 Series User Guide - ST - Issue 1.5