Leaving A Message Wait Indication; External Calls; Placing External Trunk Calls - iPECS LIP-9000 Series User Manual

Voice Over allows you to make an announcement to the busy user by
combining your voice with the other party connected to the busy user.
To Camp-On (wait off-hook) for a busy station:
 Dial Camp-On Register code and await an answer.
To request a Callback (wait on-hook) for a busy station:
 Press the MSG button and hang-up.
To make a Voice Over announcement to a busy station:
 Dial OHVO (Off Hook Voice Over) code.
 After the Splash tone is heard, begin speaking.

4.1.2 Leaving a Message Wait Indication

If the called user does not answer or is in DND mode, you may leave a
Message Wait indication. The called user will receive a Message Wait
indication; the message LED will flash.
To activate Message Waiting:
 Press the MSG button and hang-up.

4.2 External Calls

4.2.1 Placing external Trunk calls

If Least Cost Routing is set-up, the number you dial will be analyzed and
the system will place the call on the least expensive route.
You may be assigned dialing Restrictions, in which case you will receive
error tone if you attempt to dial or access a restricted number or outside line.
Line and Station Class of Service (COS), which establish dialing
restrictions, may vary during Day and Night operation (Day/Night COS).
You may need to enter an Authorization code before placing calls, in which
case you will receive a second dial tone.
NOTE
In the event of an emergency, assigned Emergency numbers (ex., a 911
call) may be dialed from any station in the System, regardless of a Station's
dialing restrictions (COS).
LIP-9000 Series User Guide - CM- Issue 1.1 27