Leaving A Message Wait; External Calls; Placing External Co/Voip Calls - iPECS LIP-8012D User Manual

LIP-7016D/7024D
OPERATION
To Camp-On (wait off-hook) for a busy station:

Press * and await an answer.
To request a Callback (wait on-hook) for a busy station:

Press
MSG
To make a Voice Over announcement to a busy station:

Dial #, after splash-tone, speak.

3.1.3 Leaving a Message Wait

If the called user does not answer or is in DND mode, you may leave a
Message Wait. If the usage of ring/massage LED is set MWI(PGM111-
F10), the ring/massage LED will flash.
OPERATION
To activate Message Waiting:

Press the
3.2

External Calls

3.2.1 Placing external CO/VoIP calls

External calls are placed on CO/IP lines. These 'lines' are accessed
either by a button on the iPECS Phone assigned as a CO/IP line or by
dial codes. The CO/IP lines are grouped for different types of calls,
local, long distance, etc. Using the CO/IP line group code, you will be
able to access any line from the group. A Flex button on the iPECS
Phone assigned as a
Dial codes for access to CO/IP lines are:
Individual CO/IP line access
88 + Line number (01-42 for iPECS-100 or 001-200 for iPECS-300 &
600).
CO/IP Group access
801-820 for iPECS-100 or 801-872 for iPECS-300 & 600
Any CO/IP Line access
9
When dialing on a CO line, which uses pulse style signals, you may
activate Dial Pulse to Tone Switchover changing to DTMF style dialing
for banking services, etc.
When placing an IP call, you must dial an IP address using '*' in place of
the dot.
button and hang-up.
button and hang-up.
MSG
button lets you access a line from a group.
LOOP
18
User Guide