Setting Up A Conference Room - iPECS LIP-9000 Series User Manual

 Repeat the above steps for additional parties.
 Select the CONF Softkey again to establish the conference.
To place a Conference on Hold:
 Press the HOLD(SAVE) button.
To retrieve the Conference from Hold:
 Select the CONF Softkey.
To establish an Unsupervised Conference:
 Establish conference with two external parties.
 Select the CONF Softkey.
 Hang-up the handset.
To retrieve an Unsupervised Conference:
 Lift the handset.
 Select the CONF Softkey.

5.4.1 Setting up a Conference Room

In addition to establishing an ad hoc Conference, up to 9 Conference
Rooms can be set up, letting up to 32 parties converse when using a
Conference module. When setting up a Conference Room, a password
can be designated for invited parties (internal and external parties) to use
for accessing the established Conference Room.
To set-up a Conference Room:
 Press the TRANSFER(PGM) button.
 Dial 53 to create a Conference Room, (for UCP/eMG).
 Dial the desired Conference Room number (1-9).
 To assign a password for the Conference Room, enter the password (up
to 5 digits).
 Press the HOLD(SAVE) button to establish the Room.
To join a Conference Room:
 Lift the handset.
 Dial 59, (Conference Room entry code for UCP/eMG).
 Dial the Conference Room Number (1-9).
36 LIP-9000 Series User Guide - ST - Issue 1.5