Setting Up A Conference Room; Call Park: Placing A Call On Hold To Page - iPECS LIP-8012D User Manual

LIP-7016D/7024D

4.4.1 Setting up a Conference Room

In addition to establishing a Conference, up to 9 Conference Rooms
can be set up letting up to 24 parties converse when using a MCIM.
When setting up a Conference Room, a password can be designated for
invited parties (internal and external parties) to use for accessing the
established Conference Room.
OPERATION
To set-up a Conference Room:

Press the

Dial 53 to create a Conference Room,

Dial the desired Conference Room number (1-9),

If desired enter a password for the Conference Room (up to 12
digits),

Press
HOLD
To join a Conference Room:

Lift the handset,

Dial 59 (Conference Room entry code),

Dial the Conference Room Number,

Dial the Conference Room password.
To delete a Conference Room:

Press the

Dial 54 (delete Conference Room code),

Dial the Conference Room number (1-9),

Dial the Conference Room password,

Press
HOLD
4.5

Call Park: Placing a call on Hold to Page

A user may transfer an active CO/IP call to a special holding location
(Park Orbit), which can be accessed easily from any station in the
system. Typically, this feature is used with
user of a parked call.
Parked calls are subject to
OPERATION
To park an active external call:

Press
TRANS

Dial the Park Orbit (601-610 for iPECS-100 or 601-619 for iPECS-
300 & 600),

Return to idle.
button,
/
TRANS PGM
to establish the Room.
/
SAVE
/ button,
TRANS PGM
/
to delete the Conference Room.
SAVE
Hold Recall
/ ,
PGM
Paging
after the Call Park timer.
27
User Guide
to notify the desired