Setting Up A Conference Room; Call Park: Placing A Call On Hold To Page - iPECS LIP-9000 Series User Manual

5.4.1 Setting up a Conference Room

In addition to establishing a Conference, letting up to 128 parties converse
when using a VPCM. When setting up a Conference Room, a password
can be designated for invited parties (internal and external parties) to use
for accessing the established Conference Room.
To set-up a Conference Room:
 Press the MENU button.
 Dial 54 to create a Conference Room.
 Dial the desired Conference Room number and *.
 If desired enter a password for the Conference Room (up to 6 digits)
and *.
 Press the HOLD(SAVE) button to establish the Room.
To join a Conference Room:
 Lift the handset.
 Dial Conference Room number.
 Dial the Conference Room password and *
To delete a Conference Room:
 Press the MENU button.
 Dial 55 to delete a Conference Room.
 Dial the desired Conference Room number and *.
 Dial the Conference Room password and *
 Press the HOLD(SAVE) button to delete the Conference Room.

5.5 Call Park: Placing a call on Hold to Page

You may transfer an active outside call to a special holding location (Park
Orbit), which can be accessed easily from any station in the system.
Typically, this feature is used with Paging to notify the desired user of a
parked call.
Parked calls are subject to Hold Recall after the Call Park timer.
To park an active external call:
 Press the TRANSFER button.
 Dial Call Park(Register/Answer) code.
36 LIP-9000 Series User Guide - CM - Issue 1.1