Chapter 3.
3.1 Answering a Call While Idle
There are three basic types of incoming calls; internal/external ringing calls,
Intercom Voice Announce calls, and Hold recalls.
Internal/External calls to an iPECS Phone will appear on the DN(Directory
Number) button.
Calls placed on Hold, including Transfers, parked calls, etc. will recall if left
on hold for too long.
ICM Voice Announce calls are answered based on the ICM Signaling
mode at the receiving phone; in Hands-free (HF) mode, after the splash
tone and announcement, speak normally into the microphone. In the
Privacy (PV) mode, lift the handset to respond. You can assign the ICM
Signaling mode as discussed in User Program Codes.
The LCD will display the calling number or, if available, the name of the
station or Trunk Access Code Name Display.
To answer a call ringing at your phone:
Lift the handset or press the flashing flexible button (as needed), the call
will be connected.
To respond to an Intercom Voice Announce call:
In HF mode, simply speak as normal into the microphone,
OR
In PV mode, lift the handset to respond.
3.2 Responding to a Call While Busy
While you are busy on another call, you may receive a Muted Ring, Camp-
On tone, or Voice-Over announcement. Muted Ring is provided over the
speaker of your Phone indicating a Call Waiting. You also may receive
Camp On tones, a burst of tones on top of the existing call, as an indication
of another call waiting.
LIP-9000 Series User Guide - CM- Issue 1.1
Receiving Calls
19