Receiving Calls; Answering A Call While Idle - iPECS LIP-9010 User Manual

3.

Receiving Calls

3.1

Answering a Call While Idle

There are 3 basic types of incoming calls; internal/external ringing calls,
Intercom Voice Announce calls, and Hold recalls.
Your phone may be assigned Ringing Line Preference; in this case, calls
that ring are answered by lifting the handset. Otherwise, you must press the
flashing Flex button. External calls to an iPECS Phone will appear under
the CO/IP line or a LOOP button. External calls are from CO lines or VoIP
channels that are programmed to ring at your phone. For external calls,
Delay Ring may be assigned allowing others to answer the call before the
call rings at your phone.
Calls can be forwarded in some manner from another user; if providing call
coverage for other users, you may also receive Station Call Coverage
calls.
Calls placed on Hold, including Transfers, parked calls, etc. will recall if left
on hold for too long.
ICM Voice Announce calls are answered based on the ICM Signaling
mode at the receiving phone; in Hands-free (HF) mode, after the splash
tone and announcement, speak normally into the microphone. In the
Privacy (PV) mode, lift the handset to respond. The ICM Signaling mode
can be assigned in Station Programming.
The LCD will display the calling number or, if available, the name of the
station or CO/VoIP line, CO Line Name Display.
To answer a call ringing at your phone:
 Lift the handset or press the flashing Flex button (as needed), the call
will be connected.
To respond to an Intercom Voice Announce call:
 In HF mode, simply speak as normal into the microphone,
OR
 In PV mode, lift the handset to respond.
LIP-9000 Series User Guide - ST 23