LIP-9070
3
Basics Operation
The iPECS Phone application is fully available once the
LIP-9070 completes registration with the iPECS host as
outlined in section 2.8. The iPECS Call icon in the Apps
Dock opens the iPECS Phone app where calls can be
managed. Details for using the iPECS Phone window
beyond the basics are covered in section 6.
3.1
Incoming Calls
When a call is received, the Call screen displays the
Caller Id for the call and the phone rings. If the Caller
Id matches the number for a contact, the contact icon
and name of the Contact are shown.
To answer the call, lift the handset or press the
speakerphone button.
Note
°
The DND button is available to activate One-
time DND.
Phone user guide.
3.2
Outgoing Calls
The LIP-9070 employs a "'live dial pad' meaning that
you need not lift the handset or press the
Speakerphone button to start a call. To place a call,
dial the desired number.
speakerphone, send the digits to the iPECS host and
show the dialing screen. When sufficient digits have
been dialed, the iPECS host routes the call.
Outgoing calls can also be placed from the Contacts
and Logs as well as Speed dial refer to sections 7, 8
and 6.1.1, respectively.
Note
°
The user may go off-hook (press the Speakerphone button or lift the handset) before dialing. In this case,
the phone receives dial tone from the iPECS host.
For details refer to the iPECS
This will activate the
8
iPKTS
User Guide