Dcn-Idenc Id-Card Encoder; Dcn-Idcrd Id-Cards - Bosch DCN Next Generation Operation Manual

Conference System
The following sections give more information about the mentioned subject:
–
–
–
3.39

DCN-IDENC ID-card Encoder

Use the DCN-IDENC ID-card Encoder and the ID-Card Encoder software module, to configure

DCN-IDCRD ID-cards.

The following sections give more information about the mentioned subject:
–
3.40 DCN-IDCRD ID-cards
With the DCN-IDCRD Chip Cards delegates and chairmen can identify themselves to the
system. Use the chip cards to give the delegates and chairmen access to:
–
–
Figure 3.70: ID-card
Notice!
Use the DCN-IDENC ID-card Encoder to configure the ID-cards.
Notice!
Labels that are larger than 72 x 24 mm can be used on the rear of the chip card.
Notice!
Refer to the Delegate Database Software User Manual for instructions to find the code of the
card in the chip.
Bosch Security Systems B.V.
Connection: DCN-DDB Data Distribution Board, page 151.
Configuration: DCN-DDB Data Distribution Board, page 228.
Operation: DCN-DDB Data Distribution Board, page 255.
Technical Data: DCN-IDENC Chip Card Encoder, page 287.
The microphones of the contribution devices.
The voting functions on the contribution devices.The intercom functions on the
contribution devices.
Operation Manual
System Overview | en
2013.11 | V2.0 | DCN-NG_OM_V4.x
63