Bosch DCN Next Generation Operation Manual page 185

Conference System
Floor distribution
Use the menu item in the 8C Floor Distr. sub-menu to set the floor distribution.
Value
On*
Off
Table 7.5: Floor distribution sub-menu values (* = default)
Intercom
Use the menu items in the 8D Intercom sub-menu to identify the location of the chairman and
the operator.
Menu item
8Da Assign Operator
8Db Assign Chairman
Table 7.6: Intercom sub-menu (* = default)
Delegate display
Use the menu item in the 8E Del. Display sub-menu to set the display language.
Menu item
8E Del. Display
Table 7.7: Delegate display sub-menu (* = default)
Wireless
Use the menu items in the 8F Wireless sub-menu.
Bosch Security Systems B.V.
Description
The central control unit sends the floor signal to all unused (empty)
interpretation channels in the system.
The central control unit does not send the floor signal to all unused
(empty) interpretation channels in the system.
Value
No*
Yes
No*
Yes
Value
Language:
English*
German*
French*
Italian*
Dutch*
Spanish*
Operation Manual
Description
Does not start the assign operator procedure.
Starts the assign operator procedure.
Lift the receiver of the intercom handset of
the operator to identify the location of the
operator.
Does not start the assign chairman procedure.
Starts the assign chairman procedure.
Lift the receiver of the intercom handset of
the chairman to identify the location of the
chairman.
Description
The language that is used by the displays of
the contribution devices. Other languages
(e.g. Chinese) can be selected via the DCN-
DLT. The English language cannot be selected.
2013.11 | V2.0 | DCN-NG_OM_V4.x
Configuration | en 185