Bosch DCN Next Generation Operation Manual page 45

Conference System
Figure 3.41: Top view
Figure 3.42: Rear view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. External headphones (solder pads) - Connect an external headphones socket to the
The following sections give more information about the mentioned subject:
–
–
–
–
Bosch Security Systems B.V.
7
10
Headphones socket - Headphone connection.
Volume buttons - Controls the volume level of the selected channel.
Display - Shows the number of the selected channel.
Channel buttons - Channel selector.
External headphones (plug) - Connects an external headphones socket to the channel
selector.
DCN cable - Connects the channel selector to the DCN system.
DCN socket - Makes a loop-through in the DCN system with the channel selector.
Level reduction plug - Reduces the headphone signal level when the microphone of a
connected device is enabled.
Solder spots
channel selector.
Installation: DCN-Flush mounted products, page 103.
Connection: DCN-FCS Channel Selector, page 138.
Configuration: DCN-FCS Channel Selector, page 219.
Technical Data: DCN-FCS Channel Selector, page 284.
6
X14
9 8
Operation Manual
System Overview | en
2013.11 | V2.0 | DCN-NG_OM_V4.x
45