Bosch DCN Next Generation Operation Manual page 40

40 en | System Overview
4.
5.
6.
7.
8.
The following sections give more information about the mentioned subject:
–
–
–
3.15 DCN-FMIC Microphone Connection Panel
The DCN-FMIC Microphone Connection Panel connects DCN-MICL and DCN-MICS Pluggable
Microphones to the DCN-DDI Dual Delegate Interface.
Figure 3.33: Microphone connection panel
The microphone connection panel contains:
1.
2.
3.
The following sections give more information about the mentioned subject:
–
–
–
–
2013.11 | V2.0 | DCN-NG_OM_V4.x
Voting/Control inputs - Connect DCN-FMICB Microphone Control Panels, DCN-FPRIOB
Microphone Priority Panels and DCN-FV(CRD) Voting Panels to the dual delegate
interface.
Lid - Gives access to the controls inside.
Audio inputs - Connects external audio sources to the dual delegate interface.
Audio outputs - Connects loudspeakers to the dual delegate interface.
DCN socket - Makes a loop-through in the DCN with the dual delegate interface.
Connection: DCN-DDI Dual Delegate Interface, page 133.
Configuration: DCN-DDI Dual Delegate Interface, page 213.
Technical Data: DCN-DDI Dual Delegate Interface, page 282.
1 2
3
Output level plug - Connects the microphone connection panel to a DCN-FCS Channel
Selector to prevent acoustic feedback.
Microphone socket - Connects a DCN-MICL or DCN-MICS Pluggable Microphone to the
microphone connection panel.
Solder spot - Enables or disables the green LED ring of the connected DCN-MICL or DCN-
MICS Pluggable Microphone.
Installation: DCN-Flush mounted products, page 103.
Connection: DCN-FMIC Microphone Connection Panel, page 135.
Configuration: DCN-FMIC Microphone Connection Panel, page 218.
Technical Data: DCN-FMIC Microphone Connection Panel, page 283.
Operation Manual
Conference System
Bosch Security Systems B.V.