Bosch DCN Next Generation Operation Manual page 225

Conference System
Option
None
Override
Interlock
Table 7.42: Microphone lock options
Notice!
When the interlock mode is None and interpreter desks using the same outgoing channel are
connected to different CCUs, the interpreter desks work as if the interlock mode is set to
Interlock.
Menu m
Menu m sets the speak slowly signal on and off. For Speak slowly signaling refer to DCN-IDESK
Interpreter Desks, page 50.
Menu n
Menu n sets the help signaling on and off. For Help signaling refer to DCN-IDESK Interpreter
Desks, page 50.
Menu o
Menu o sets the speech timer of the interpreter desk on and off. It is necessary to set each
interpreter desk in turn.
Menu p
Menu p sets the source for the microphone source. It is necessary to set each interpreter desk
in turn.
Exit screen
From the exit screen menu you can exit the installation mode.
Bosch Security Systems B.V.
Description
No lock functionality.Audio inputs of the audio expander are
disabled for translation channels only.
Allows an interpreter to override another interpreter in another
interpreter booth supplying the same interpretation channel.
Blocks another interpreter from using the same channel in
another interpreter booth.
Operation Manual
Configuration | en 225
2013.11 | V2.0 | DCN-NG_OM_V4.x