Bosch DCN Next Generation Operation Manual page 205

Conference System
7.9 DCN-WAP Wireless Access Point
Use the configuration menu of the central control unit to configure the wireless access point.
System ID
Notice!
Set the correct system identity before you do the installation of the system (refer to
Initialization, page 178). When you change the system identity after you did the initialization,
you must do the initialization again.
Set the system identity with the 8J menu item. Adjacent systems must have different system
identities and different carriers.
8J CCU Mode
12-01 Standalone
8J CCU Mode
03-01 Standalone
Figure 7.12: System IDs for adjacent systems
Carrier
Set the carrier of the wireless access point with the 8Fb WAP menu item. Adjacent systems
must have different carriers and different system identities.
Notice!
If adjacent systems are using the same carrier, they must be separated by a minimum
distance of 500 m.
Bosch Security Systems B.V.
8J CCU Mode
08-01 Standalone
Operation Manual
Configuration | en 205
2013.11 | V2.0 | DCN-NG_OM_V4.x