Bosch DCN Next Generation Operation Manual page 257

Conference System
<esc>[<numlines>D
Figure 8.10: Cursor left
Moves the cursor to the left in the same text line. The number of columns that it is moved is
defined by numlines. If the cursor is already in the first column, the hall display must ignore
this escape function. If numlines is omitted, the data distribution board assumes a default
value of 1 column.
Erase display
<esc>[2J
Figure 8.11: Erase display
Erases the hall display and moves the cursor to its home location (text line 1, column 1).
Erase line
<esc>[K
Figure 8.12: Erase line
Erases all characters from the location of the cursor to the end of the text line (including the
character at the cursor location). The cursor remains in the same place.
Numeric display
On a numeric display, the data distribution board can show parliamentary voting results and a
voting timer. A numeric display does not require a control PC.
The data distribution board sends six text lines to the hall display. Each text line contains six
locations. This is only applicable for parliamentary voting (Yes / No / Abstain) other voting
modes are not supported.
Line
1
2
3
4
5
6
Table 8.34: Numeric display
Notice!
If there is no voting timer, the first text line is empty.
The voting timer is a number of four digits (two for the minutes, two for the seconds). There is
no separator between the minutes and the seconds. The separator must be part of the fixed
text on the hall display.
Bosch Security Systems B.V.
Item
Voting timer
Number of present delegates
Number of delegates who voted 'Yes'
Number of delegates who voted 'No'.
Number of delegates who voted 'Abstain'.
Number of delegates who did not vote.
Operation Manual
Operation | en 257
2013.11 | V2.0 | DCN-NG_OM_V4.x