Bosch DCN Next Generation Operation Manual page 198

198 en | Configuration
Menu item
4A AGC
4B Routing
4C Unit Name
4D Defaults
Table 7.20: Setup sub-menu (* = default)
Defaults
Use the Defaults sub-menu to put back the default values for all parameters in the
configuration menu.
Menu item
4D
Table 7.21: Defaults sub-menu (* = default)
Automation gain control (AGC)
Use the AGC menu item to enable or disable the AGC of the audio inputs. If necessary, enable
the AGC for the audio inputs that inject external interpretations in the system. The AGC makes
sure that the nominal level of the received interpretations is 9 dBV (XLR), -6 dBV (cinch).
When the nominal input of an external interpretation is high, the audio of the external
interpretations will be too loud compared to the audio of the 'internal' interpretations from
the interpreter desks.
Notice!
When channel 00 is assigned to an audio input, the system automatically disables AGC for the
audio input. You cannot manually enable AGC for an audio input to which channel 00 is
attached.
2013.11 | V2.0 | DCN-NG_OM_V4.x
Parameter Value
Input: AGC:
Input 1 On, Off
Input 2 On, Off
Input 3 On, Off
Input 4 On, Off
Input/output: Channel:
Input 1 --, 00 to 31,
Input 2 --, 00 to 31
Input 3 --, 00 to 31
Input 4 --, 00 to 31
Output 1 --, PA, 00 to 31
Output 2 --, PA, 00 to 31
Output 3 --, PA, 00 to 31
Output 4 --, PA, 00 to 31
--- Name: Cobranet*
Customer name
--- ---
Parameter Value
Reset to defaults No* Yes
Operation Manual
Conference System
Description
Sets the automatic gain
control (AGC) of the audio
inputs on and off.
The channel that is attached
to the audio input or audio
output of the cobranet
interface.
(PA = public address
system.)
The name of the cobranet
interface (max. 16
characters).
Opens the Reset menu
item.
Description
Does not put back the
default values.Sets all
parameters to the default
values. The name is not
changed.
Bosch Security Systems B.V.