Bosch DCN Next Generation Operation Manual page 236

236 en | Operation
Enquiry
Use the 7 Enquiry menu item to open the enquiry sub-menus. Sub menu item 7A CCU gives
general information about the central control unit. Sub menu item 7B WAP gives general
information about the WAP.
CCU
Use the 7A CCU menu item to open the CCU sub-menu. The menu items in this sub-menu give
general data about the central control unit.
Menu item
7Aa Serial Number
7Ab HW Version
7Ac FPGA Version
7Ad FW Version
7Ae Mac Address
7Af IP Address
Table 8.9: CCU sub-menu (* = default)
WAP
Use the 7B WAP menu item to open the WAP sub-menu. The menu items in this sub-menu give
general data about the WAP central control unit.
Notice!
This data must be mentioned in all service requests and failure reports.
Menu item
7Ba Serial Number
7Bb HW Version
7Bc FPGA Version
7Bd FW Version
Table 8.10: CCU sub-menu (* = default)
2013.11 | V2.0 | DCN-NG_OM_V4.x
Value Description
e.g. 22000010 Chk: The hexadecimal serial number and checksum of
32 the central control unit.
e.g. 02.00 The version number of the hardware of the
central control unit.
e.g. 04.00.3959 The version number of the FPGA firmware of the
central control unit.
* e.g. 04.00.4026 The version number of the firmware of the
central control unit.
e.g. 012345-6789AB The Mac address of the central control unit.
e.g. 192.168.0.100 The IP address of the central control unit.
Value Description
e.g. 1E00271F The hexadecimal serial number of the central
control unit.
e.g. 02.00 The version number of the hardware of the
central control unit.
e.g. 04.00.3909 The version number of the FPGA firmware of the
central control unit.
e.g. 04.00.4026 The version number of the firmware of the
central control unit.
Operation Manual
Conference System
Bosch Security Systems B.V.