Bosch DCN Next Generation Operation Manual page 175

Conference System
Figure 6.99: Inserting the Torx screw
7.
Figure 6.100: Tightening the Torx screw
8.
Figure 6.101: Dust cap on connector
Bosch Security Systems B.V.
Tighten the Torx screw using the Torx screwdriver (tool 7).
Put the dust cap on the connector to protect the plastic optical fibers.
Operation Manual
Connection | en 175
2013.11 | V2.0 | DCN-NG_OM_V4.x