Bosch DCN Next Generation Operation Manual page 53

Conference System
Notice!
The distance between the centers of the screw holes is 100 mm.
29. De-init switch - Erases the address of the interpreter desk. All LEDs on the interpreter
30. Sensitivity potentiometer - Adjusts the volume level of the microphone that is connected
31. Cable lock - Fixes the DCN cable.
The following sections give more information about the mentioned subject:
–
–
–
–
3.27 DCN-EPS Extension Power Supply
The DCN-EPS Extension Power Supply supplies power to the DCN system. Use it to increase
the number of devices that can be connected to the system.
Notice!
The DCN-EPS-UL Extension Power Supply is the CSA/UL approved version of the DCN-EPS.
Figure 3.55: Front view
Figure 3.56: Rear view
Bosch Security Systems B.V.
desk come on when the interpreter desk does not have an address.
to the interpreter desk.
Installation: DCN-IDESK Interpreter Desks, page 108
Connection: DCN-IDESK Interpreter Desks, page 141.
Configuration: DCN-IDESK Interpreter Desks, page 221.
Technical Data: DCN-IDESK Interpreter Desks, page 285.
1
2 3 4
Trunk Tap-off
In Out Out
5
Out
6
Operation Manual
System Overview | en
2013.11 | V2.0 | DCN-NG_OM_V4.x
53