Bosch DCN Next Generation Operation Manual page 39

Conference System
3.13 DCN-FPT Flush Positioning Tool
When using the block-mounting method to install flush-mounted devices, the DCN-FPT Flush
Positioning Tool can be used to measure the distance between two couple pieces.
Figure 3.31: Flush positioning tool
The following sections give more information about the mentioned subject:
–
–
3.14 DCN-DDI Dual Delegate Interface
Use the DCN-DDI Dual Delegate Interface to connect contribution devices with flush-mounted
devices.
Figure 3.32: Dual delegate interface
The dual delegate interface contains:
1.
2.
3.
Bosch Security Systems B.V.
Connection: DCN-Flush mounted products, page 103.
Technical Data: DCN-FPT Flush Positioning Tool, page 282.
7 8
6
DCN cable - Connects the dual delegate interface to the DCN.
Mode selector - Sets the mode in which the dual delegate interface operates.
Intercom socket - Connects an DCN-ICHS Intercom Handset to the dual delegate
interface.
5
Operation Manual
System Overview | en
1
2
3
4
2013.11 | V2.0 | DCN-NG_OM_V4.x
39