Bosch DCN Next Generation Operation Manual page 184

184 en | Configuration
Setup
Use the 8 Setup menu item to open the Setup sub-menu. You can use the menu items in this
sub-menu to configure the central control unit and the system.
Microphone
Use the menu items in the 8A Microphone sub-menu to set the microphone.
Menu item
8Aa Mic. Priority
8Ab Request LED
8Ac Auto Mic. Off
8Ad Request
8Ae Respons
Table 7.2: Microphone sub-menu (* = default)
Refer to the next table for the microphone priority settings
Value
Permanently off
Temporarily off
Table 7.3: Microphone priority sub-menu values
Attention tones
Use the menu items in the 8B Att. Tones sub-menu to set the attention tones.
The central control unit can play an attention tone when the chairman:
–
–
Menu item
8B Att. Tones
Table 7.4: Attention tones sub-menu (* = default)
2013.11 | V2.0 | DCN-NG_OM_V4.x
Parameter
---
LED setting
List Length
List Length
Description
The system does not activate the microphones of the delegates again
when the chairman releases the priority button. The requests-to-speak
and speakers are erased.
The system activates the microphones of the delegates again when the
chairman releases the priority button. The requests-to-speak and
speakers are not erased.
Pushes the priority button on the chairman device.
Starts a voting session.
Parameter
Event:
Priority*
Voting
Value
Temporarily off*
Permanently off
Flashing*
Continuous
On
Off*
1-99
1-25
Value
Tone:
Off, 1*, 2, 3
Off*, 1, 2, 3
Operation Manual
Conference System
Description
The action taken by the system
when the chairman releases the
priority button.
Sets the behavior of the request
LED for the first delegate in the
request list.
Switches active microphones
automatically off after 30
seconds no speech. Chairman
units and interpreter desks are
excluded.
Sets the maximum number of
Requests in the queue.
Sets the maximum number of
Responses in the queue.
Description
The attention tones of the
system.
Bosch Security Systems B.V.