Bosch DCN Next Generation Operation Manual page 55

Conference System
3.29 LBB4115/00 Tap-off unit
Use the LBB4115/00 Protected Trunk Splitter to make tap-offs in the DCN that have
protection against short-circuits. Typically, the LBB4115/00 Protected Trunk Splitters are used
to connect DCN‑IDESK Interpreter Desks to the system.
The differences between the LBB4114/00 Trunk Splitter and the LBB4115/00 Protected Trunk
Splitter are that the DCN tap-off sockets of the LBB4115/00 Protected Trunk Splitter:
–
–
The following sections give more information about the mentioned subject:
–
–
–
3.30 LBB4116 Extension Cables
The following extension cable (assembly) products are available:
Type number
LBB4116/02
LBB4116/05
LBB4116/10
LBB4116/15
LBB4116/20
LBB4116/25
LBB4116/00
Table 3.5: Extension cables
Except for LBB4116/00, all extension cables have DCN plugs and sockets.
Connectors
Make custom-made cables with the LBB4116/00 Extension Cable (100 m) and the
LBB4119/00 DCN Connectors (refer to LBB4114/00 Trunk Splitter, page 54).
Figure 3.58: LBB4119/00 DCN connectors
Refer to LBB4116 Extension Cables, page 286 for more information.
Bosch Security Systems B.V.
Each output has a maximum load of 4.5 W
Trunk and tap-off outlets are protected against short-circuits.
Installation: LBB4115/00 Tap-off unit, page 110.
Connection: LBB4115/00 Tap-off unit, page 146.
Technical Data: LBB4115/00 Tap-off unit, page 286.
Cable length
2 m
5 m
10 m
15 m
20 m
25 m
100 m
Plug
Socket
Operation Manual
System Overview | en
2013.11 | V2.0 | DCN-NG_OM_V4.x
55