Bosch DCN Next Generation Operation Manual page 128

128 en | Connection
6.8 DCN-DIS Discussion Unit (wired)
Connect the discussion unit to the DCN with the DCN cable. You can use the DCN socket to
make a loop-through with the discussion unit.
Notice!
You can move the DCN cable from the rear side to the bottom side of the discussion unit
(refer to DCN-DIS and DCN-WD Discussion units, page 96).
You can use the cable-to-unit clamps to lock DCN cables to discussion units.
Figure 6.22: Cable-to-unit clamp
2013.11 | V2.0 | DCN-NG_OM_V4.x
1
2
Operation Manual
Conference System
Bosch Security Systems B.V.