Taylor-Dunn B0-T48-48 Taylor Truck T48 Operation Manual page 76

MB-T48-01
9. Remove the cover retaining bolts.
10. Remove the cover plate from the differential
and let the remaining oil drain from the
housing.
11. Remove the circlip from the idler gear.
12. Remove the input shaft/bearing assembly and
idler gear/bearing assembly at the same time.
13. Remove the pinion nut from the output gear.
SECTION 3 PAGE 40
Do not damage the
housing sealing
surface or deform the
cover plate. This will
cause leaks and
destroy the gears,
bearings and races
Failure to do so will
void any and all
warranties.