Status Led Error Code - Taylor-Dunn B0-T48-48 Taylor Truck T48 Operation Manual

STATUS LED ERROR CODE

There are three status lights (LED's) on the charger name plate. These LED's normally indicate the current
operating state of the charger. All three LED's flashing indicate an error in the charger. See the table below
for an explanation if the error codes:
Error
Description
Code
Reverse polarity or open circuit to
1
the batteries
AC line voltate too high or too
2
low
3 Charger overheated
4 Input or Output over current
Action Required
Check wiring for corrosion, loose connections. broken wires and
proper connection to the batteries
Check the input voltage.
It must be within 96-132VAC or 196-266VAC
Wait for charger to cool, the charger will automaticaly restart. Inspect
for dirt or debris on the charger cooling fins and clean as required.
Charger will automaticaly correct for this condition and restart
Charger Troubleshooting
Electrical Troubleshooting
Page 5