Removing the Rear Axles (Continued)
16. Use new bolts for the axle retaining plate.
Use new Taylor-Dunn (96-327-10) bolts for the axle retaining plate.
The bolts have a manufactured thread patch applied to each bolt.
Failure to use proper bolts may cause the axle to fall out of the
truck and cause property damage and or serious bodily injury.
17. Add oil, to the level of the fill plug threads.
18. Lower the vehicle.
19. Set the park brake.
20. Reconnect the main positive and negative cables at the batteries.
21. Remove the blocks from behind the wheels.
22. Release the park brake and test drive the vehicle.
SECTION 3
PAGE 37
MB-T48-01