Clean The Wire - Canon imagePRESS C7011VPS series Operation Manual

Clean the wire

Introduction
If streaks appear on printed output or parts of the printed image are missing, clean the corona
assembly wires inside the main unit.
NOTE
• It takes approximately 35 seconds to clean the wires.
• Wire cleaning cannot be performed during printing.
Procedure
1.
Touch [System] -> [Maintenance].
2.
Press [Start maintenance].
3. Touch [Clean the corona wires] and touch [Start]
A wizard opens.
4. Press [Next].
A status message displays.
5.
Press [Finish].
6.
Touch [Stop] to close the [Maintenance tasks] menu.
NOTE
If the procedure displays an engine error, contact your local service representative.
.
Chapter 14 - Maintenance and print quality
Clean the wire
345