Adjust The Paper Tray To Hold A Different Media Size - Canon imagePRESS C7011VPS series Operation Manual

Adjust the paper tray to hold a different media size

Adjust the paper tray to hold a different media size
Introduction
Before you can load media with a different media size, you must adjust the paper tray.
NOTE
If the printer is in the sleep mode, you may not be able to open the paper tray even if you press
the open button. In this case, press the Sleep button
machine, and then press the open button.
Procedure
1.
Press the button on the paper tray that you want to adjust, and pull out the paper tray until it
stops. When the inside lifter automatically descends to the paper loading position, lift the paper
holder plate and remove all of the remaining paper.
IMPORTANT
If the printer is in the sleep mode, you may not be able to open the paper tray even if you press
the open button. In this case, press the Sleep button
machine, and then press the open button.
2.
Unlock the lever of the size change plate.
114 Chapter 7 - Media handling
on the operator panel to reactivate the
on the operator panel to reactivate the