Apply Manually Adjusted Cmyk Curves To A Single Job - Canon imagePRESS C7011VPS series Operation Manual
Hide thumbs
Also See for imagePRESS C7011VPS series:
- Operation manual (391 pages) ,
- Service manual (121 pages)
Table of Contents
Advertisement
Apply manually adjusted CMYK curves to a single job
Introduction
Manual adjustment of CMYK curves for a single job is on the job level. Job-level CMYK curves are
added to the CMYK curves for media family calibration and system-level CMYK curves.
Procedure
1.
Calibrate the printer.
2.
To locate the job, do one of the following.
• Touch [Jobs] -> [Queues] -> [Waiting jobs] -> job.
• Touch [Jobs] -> [DocBox] -> job.
3.
Touch [Properties] -> [Adjust image]
The window opens in [Basic mode].
4.
Make the adjustments.
• Use the colored slide bars to adjust the color adjustment curve by color.
• Use the + and - sign at the right of the K bar to adjust the density in one step.
5.
If required, touch [Advanced mode] in the upper-right corner.
The window opens by default with the color Cyan.
On the right, select the color to adjust.
On the left, select the areas to adjust.
At [Color clipping], you can define the clipping ranges.
At curves, you have three control points to adjust the calibrated CMYK curve.
6.
Touch the Save icon at the top to store the adjustments as a preset for later reuse.
Apply manually adjusted CMYK curves to a single job
Chapter 14 - Maintenance and print quality
359
Advertisement
Table of Contents
