The Operator Panel - Canon imagePRESS C7011VPS series Operation Manual

The operator panel

The operator panel
Introduction
The operator panel helps you to carry out print jobs, copy jobs and scan jobs. This section
describes the main components of the operator panel.
IMPORTANT
You can clean the screen of the operator panel with a 50% mix of water and isopropyl alcohol
(K2). Use a lint-free cloth. Always put the cleaner onto the cloth and not directly on the screen.
Illustration
9
4
5
[6] The operator panel
The components of the operator panel
The components of the operator panel
Component
1 Sleep mode key
2 Stop key
3 Paper tray key
28 Chapter 2 - Main parts
6 7 8
10
1
2
3
Function
Depending on whether the printer is currently ac-
tive or in the sleep mode:
• Put the machine into the sleep mode, or
• Wake up the machine from the sleep mode.
• Shut down the printer and controller.
Stop the printer.
• After a set, or
• As soon as possible
Get immediate and always access to the [Trays]
section on the operator panel to do the following,
for example:
• Check the content of all paper trays.
• Load a new media type into a paper tray.
• Change the media type which is available in one
of the paper trays.
4