Load The Media Into The Bulk Media Module (Optional) - Canon imagePRESS C7011VPS series Operation Manual

Load the media into the bulk media module (optional)

Load the media into the bulk media module (optional)
Introduction
This section describes how to load the media into the bulk media module.
When you load the media via the [Load] button in the [Schedule], the media is automatically
assigned to the correct tray.
When you load and assign the media via the [Assign] button in the [Trays] view, you must assign
the loaded media to the corresponding paper tray manually.
IMPORTANT
If the printer is in the sleep mode, you may not be able to open the paper tray even if you press
the open button. In this case, press the Sleep button
machine, and then press the open button.
NOTE
The following paper sizes can be loaded into the paper tray:
• 330.2 mm x 482.6 mm, 320 mm x 450 mm (SRA3), 304.8 mm x 457.2 mm, A3, B4, A4, A4R, and
B5
• 13" x 19", 12.60" x 17.72", 12" x 18", 11" x 17", LGL, LTR, or LTRR
CAUTION
When loading paper, take care not to cut your hands on the edges of the paper.
IMPORTANT
• Never place paper or any other items in the empty part of the deck next to the paper stack.
Doing so may cause paper jams.
• A paper blower is attached inside of the paper tray. Do not insert paper clips or other foreign
objects into the blower port.
• Paper jams may occur if you load paper into the paper tray in a low humidity environment. If
paper jams occur, follow the instructions on the touch panel display to remove the jammed
paper. In addition, make sure that the loaded paper is not curled. Paper curls must be
straightened out prior to loading.
• A screen prompting you to load paper also appears if the selected paper tray is not fully
inserted into the machine. Make sure that the paper tray is properly in place.
• Do not load the following types of paper into the paper trays. Doing so may cause a paper
jam.
- Severely curled or wrinkled paper
- Thin straw paper
- Paper which has been printed on using a thermal transfer printer (Do not print on the reverse
side of this paper either.)
- Tab paper
• Fan the stack of paper well before loading it, and align the edges of the paper stack on a flat
surface.
• The paper tray can only accommodate paper from 64 to 300 g/m² / 18 lb bond to 110 lb bond
in weight.
118 Chapter 7 - Media handling
of the operator panel to reactivate the