Change The Settings For Covers - Canon imagePRESS C7011VPS series Operation Manual

Change the settings for covers

Change the settings for covers
Introduction
When front covers or back covers are required, the settings are usually set in the printer driver,
for example. However, you can view and change the settings for the covers via the operator
panel.
You can change the following settings for both the front cover and the back cover separately.
• Enable or disable the use of a cover.
• Select the desired media from the [Media catalog].
• Indicate whether the cover must be left empty, or printed 1-sided and/or 2-sided.
Procedure
1.
Touch [Jobs] -> [Waiting jobs], or select a [DocBox].
2.
Touch the job of which you want to change the cover settings.
NOTE
You cannot change this setting for the active print job .
3. Touch [Properties] - or touch the job 2x to open the [Properties] window.
4. Touch the [Cover] button.
5. Make the required changes.
6.
Press [OK].
7.
Press [OK].
194 Chapter 8 - Carry out print jobs