Clean the automatic document feeder rollers
Clean the automatic document feeder rollers
Introduction
If your originals have black streaks or appear dirty after scanning them through the feeder, clean
the rollers of the feeder.
NOTE
• It takes approximately 20 seconds to clean the feeder.
• Use clean A4 / LTR paper (60 to 80 g/m² / 16 lb bond to 20 lb bond).
• Feeder roller cleaning cannot be performed during printing.
Procedure
1.
Touch [System] -> [Maintenance].
2.
Press [Start maintenance].
3.
Touch [Clean the rollers of the ADF] and touch [Start]
A wizard opens.
4.
Put 10 sheets of blank paper into the feeder.
5.
Touch [Next]
A status message displays.
6.
Press [Finish].
7.
Touch [Stop] to close the [Maintenance tasks] menu.
346
Chapter 14 - Maintenance and print quality
.