Adjust the media size for the bulk media module (optional)
Introduction
This section explains how to change the paper size for the optional bulk media module.
IMPORTANT
Never place paper or any other items in the empty part of the paper tray next to the paper stack.
Doing so may cause paper jams.
Procedure
1.
Press the open button to open the paper tray.
The inside lifter automatically descends to the paper loading position.
IMPORTANT
If the printer is in the sleep mode, you may not be able to open the paper tray even if you press
the open button. In this case, press the Sleep button
machine, and then press the open button.
2.
Remove all of the loaded paper, the paper size sheet, and deck base plate.
3.
Loosen the blue screw on the rear edge retainer using a coin or something similar.
4.
Remove the rear edge retainer.
Adjust the media size for the bulk media module (optional)
of the operator panel to reactivate the
Chapter 7 - Media handling
123