Put Originals On The Glass Plate - Canon imagePRESS C7011VPS series Operation Manual

Put originals on the glass plate

Introduction
You can use the color scanner to copy bound originals (such as books and magazines), heavy or
lightweight originals, and transparencies.
You can place an original either vertically or horizontally. Always align the top edge of your
original with the back edge of the glass plate (by the arrow in the top left corner).
Procedure
1.
Lift the feeder/platen cover.
IMPORTANT
This machine is equipped with an open/close sensor on the feeder/platen cover (see circled area
in the above illustration). When placing originals on the glass plate, lift the feeder/platen cover
approximately 300 mm / 11.8" so that the sensor detaches from the feeder/platen cover.
2.
Place your originals face down.
3.
Gently close the feeder/platen cover.
Put originals on the glass plate
Chapter 9 - Carry out copy jobs 243