Engine Maintenance (Trained Operators) - Canon imagePRESS C7011VPS series Operation Manual

Engine maintenance (trained operators)

Engine maintenance (trained operators)
Introduction
Only operators that are specially trained in engine maintenance are allowed to perform engine
maintenance. Before you can perform engine maintenance tasks you have to put the engine into
the engine maintenance mode.
IMPORTANT
Make sure you are specially trained in engine maintenance for this product to prevent major
damage.
Procedure
1.
On the operator panel, press the [System] button.
2. Press [Maintenance].
3. Touch [Start maintenance].
4. Press [Printer maintenance].
5.
Touch [Start]
6.
Enter the maintenance PIN and touch [OK].
The [Printer maintenance] window opens.
7.
Touch [Next] and wait a moment while the engine prepares for maintenance.
NOTE
If you are specially trained in engine maintenance, you can now perform maintenance tasks
using the Operator's Maintenance Manual.
IMPORTANT
Only continue with the next step after you finished maintenance.
8. Touch [Next] to stop the engine maintenance mode.
9. Touch [Finish] to stop the preparation procedure.
10.
Press [Stop].
348 Chapter 14 - Maintenance and print quality
.