Canon imagePRESS C7011VPS series Operation Manual page 165

Setting Values
[Advanced set-
tings] -> [Sheet
orientation]
[Print delivery]
[Advanced set-
tings] -> [Print
order]
[Advanced set-
tings] -> [Rota-
tion]
[Margin erase]
[Basic mode]
[Adjust image]
[Advanced
mode]
Description
[Header up LEF]
Deliver the prints with the header on top side and in portrait
position (vertical).
[Header up SEF]
Deliver the prints with the header on top side and in land-
scape position (horizontal).
[Header down LEF]
Deliver the prints with the header at the bottom side and in
portrait position (vertical).
[Header down SEF]
Deliver the prints with the header at the bottom side and in
landscape position (horizontal).
• [Front/back]
Default value. The front page on the front, the back page
on the back.
• [Back/front]
Puts the front page on the back and the back page on the
front.
• [0 degrees]
• [180 degrees]
Rotates the prints 180 degrees.
Margins of a document sometimes contain notes or punch
holes, for example. The machine allows you to hide these el-
ements on the print. With the + and - buttons of the [Margin
erase] setting you can define how much margin of the origi-
nal you want to erase. You can enter a value up to 100 mm /
3.94".
In the [Basic mode], you can adjust the calibrated CMYK
curves by color. You can adjust the density when you select
all colors at once. Furthermore, you can adjust the contrast.
In the [Advanced mode], you can adjust the calibrated CMYK
curves by color with three control points. Furthermore, you
can clip color ranges in the lower and upper areas of the
calibrated CMYK curve. You can achieve background com-
pression when you clip colors in the lower area of the cali-
brated CMYK curve.
Description of the print job settings
Chapter 8 - Carry out print jobs
4
165