Refresh The Fixing Roller - Canon imagePRESS C7011VPS series Operation Manual

[Refresh the fixing roller]

Introduction
When paper with a longer width is used after copying or printing 100 or more sheets of paper
with a shorter width (for example, when you use A3 paper after A4R paper), luster streak may
appear on both edges in the feeding direction. In addition, patches of uneven gloss may appear in
the high density areas of the printed heavy paper or coated paper. In this case, the streaks and
patches of uneven gloss may be reduced by refreshing the fixing roller and cleaning its surface.
IMPORTANT
Refreshing the fixing roller decreases the lifetime of the fixing roller largely.
NOTE
Refreshing the fixing roller cannot be performed during printing.
Illustration
A4
[77] The feeding direction (1) and luster streaks (2)
Procedure
1. Touch [System] -> [Maintenance].
2.
Press [Start maintenance].
3.
Touch [Refresh the fixing roller] and touch [Start]
4.
Enter the maintenance PIN and touch [OK].
A wizard opens.
5.
Press [Next].
A status message displays.
6. Press [Finish].
7. Touch [Stop] to close the [Maintenance tasks] menu.
Result
IMPORTANT
If the procedure fails or if you do not get the required result, contact your local service
representative.
1
A3
.
2
Chapter 14 - Maintenance and print quality
[Refresh the fixing roller]
347