Finish The Output - Canon imagePRESS C7011VPS series Operation Manual

Finish the output

Finish the output
Procedure
1. Place the originals face up into the ADF, or place 1 original face down on the glass plate.
2. Touch [Jobs] -> [Copy/Scan] -> [Copy job].
3. At the [Binding] setting, select the required number of staples and the location of the staples.
4.
At the [Punching] setting, select the required number of holes.
5.
At the [Folding] setting, select the folding method.
6.
At the [Trimming] setting, define the trim settings
7.
If required, define the other settings for the original document and the output.
8.
Enter the generic values in the [Job] section.
9. Touch [Start]
254 Chapter 9 - Carry out copy jobs
.