Adjust The Brightness And Contrast Of The Operator Panel - Canon imagePRESS C7011VPS series Operation Manual

Adjust the brightness and contrast of the operator
panel
Introduction
You can adjust the brightness and contrast of your monitor to improve the readability of the
operator panel. The required brightness and contrast settings can depend on the lighting in your
room, for example.
Setting
[Auto adjust]
[Brightness]
[Contrast]
Procedure
1.
Touch [System] -> [Setup] -> [Operator panel settings].
2.
Touch [Auto adjust] to optimize the brightness and contrast of the screen automatically.
3.
Touch [OK] when the brightness and contrast are OK, or continue with the steps below when
these settings are not yet OK.
4. Touch '-' to decrease or '+' to increase the [Brightness].
5. Touch '-' to decrease or '+' to increase the [Contrast].
6. Press [OK].

Adjust the brightness and contrast of the operator panel

Description
The screen of the operator panel will automatically set the correct
ratio of brightness and contrast.
You can increase or decrease the brightness from level 20 to 100
in steps of 1. The factory default value is 80. Higher values will in-
crease the brightness.
You can increase or decrease the contrast from level 10 to 100 in
steps of 1. The factory default value is 50. Higher values will in-
crease the contrast.
Chapter 6 - Adapt printer settings to your needs 87