Load The Media Into The Bulk Media Module - Canon imagePRESS C7010VPS Operating Information Manual

Load the media into the bulk media module (optional)
Introduction
This section describes how to load the media into the bulk media module.
When you load the media via the 'Load' button in the 'Schedule', the media is automat-
ically assigned to the correct tray.
When you load and assign the media via the 'Assign' button in the 'Trays' view, you must
assign the loaded media to the corresponding paper tray manually.
#
IMPORTANT
If the printer is in the sleep mode, you may not be able to open the paper tray even
if you press the open button. In this case, press the control panel power switch to re-
activate the machine, and then press the open button.
#
NOTE
The following paper sizes can be loaded into the paper tray:
ISO sizes: 330.2 mm × 482.6 mm, 320 mm × 450 mm (SRA3), 304.8 mm ×
457.2 mm, A3, B4, A4, A4R, and B5
US Sizes: 13" x 19", 12.60" x 17.72", 12" x 18", 11" x 17", LGL, LTR, or LTRR
#
When loading paper, take care not to cut your hands on the edges of the paper.
Load the media into the bulk media module (optional)
CAUTION
Chapter 9 - Paper, toner, and staples 235