Table of Contents
Advertisement
Assign the media to a paper tray - Load and assign the
media to a paper tray
Introduction
The [Trays] view has several functions (see
This section describes how to open the paper trays and assign the media in the [Trays] view.
NOTE
The preferred way to load the required media is via the [Schedule]. There you can select a media
and use the [Load] button, or press the required media button 2 times.
Procedure
1.
On the operator panel, select the [Trays] view.
2.
Touch the paper tray where you want to put the media, for example tray 2.
3.
Press [Open].
4.
Load the media (see
5.
Close the paper tray.
NOTE
There is a risk that a job is printed on a wrong media.
6.
Press [Assign].
A window with media names appears. The previous media in the selected paper tray is
highlighted.
NOTE
The list displays all the media in the media catalog that match the position of the paper guides
inside the closed paper tray. When the list is empty, the media catalog does not contain media
that match the position of the paper guides.
7.
Touch the name of the loaded media, for example Premium Label.
8.
Press [OK].
Assign the media to a paper tray - Change the currently assigned
media type
Procedure
1.
On the operator panel, select the [Trays] view.
2.
Select the paper tray for which you want to change the assigned media type.
3.
Press [Assign].
A window with media names appears.
NOTE
The list displays all the media in the media catalog that match the current position of the paper
guides inside the paper tray. When the list is empty, the media catalog does not contain media
that match the position of the paper guides.
NOTE
There is a risk that a job is printed on a wrong media.
4.
Touch the name of the new media type.
Assign the media to a paper tray - Load and assign the media to a paper tray
Load the media on page
Introduction to the Trays view on page
53).
56).
Chapter 6 - Media handling
59
Advertisement
Table of Contents
Troubleshooting
