Table of Contents
Advertisement
5. Accessory parts
No.
Name
1. User's guide holder
2. Quick start guide
3. Installation manual
4. User's guide CD
5. CD-ROM
6. Paper size label
7. Panel sheet
8. Blank label
9. Power cord *
10. Connector cover
11. Duct cover
12. Screw
13. Stylus pen
14. Waste toner box
* Varies depending on the applicable marketing
area.
Keep this bag away from babies and
children. Do not use in cribs, beds,
carriages, or playpens.
The thin film may cling to nose and
mouth and prevent breathing. This bag is
not a toy.
If a power cord is not supplied, use only
the power cord that meets the following
conditions.
Failure to do this could result in a fire or
electrical shock.
• The power cord has voltage and current rating
appropriate for the rating plate on this machine.
• The power cord meets regulatory requirements
for the area.
• The power cord is provided with grounding
pin/terminal.
*
Power supply: 120V 12A, 220-240V 8A
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
6. Installing the main body and the Paper
Feed Cabinet (or the Desk)
Q'ty
(1) Take the main body and the Paper Feed Cabinet
1
(or the Desk) out from its packaging.
1
Caution:
1 set
Main body mass: approx. 72 kg (158-3/4 lb)
Make available collective manpower of an appro-
1
priate size for transporting the main body.
1 set
Note:
1
Remove the main body, holding it by the locations
1
on the left side and the handles on the right side
as shown in the illustration and keeping it level.
1
1
1
1
When holding the transportation handles,
be careful not to catch your fingers in the
1
machine.
1
1
(2) Refer to the installation manual for the Paper
Feed Cabinet (or the Desk) and follow the
"Installation Procedures."
Note:
If installing the Heater HT-509 and the Power Sup-
ply BOX MK-734, install them at the same time as
the installation of the Paper Feed Cabinet (or the
Desk).
E-3
Hide quick links:
Advertisement
Table of Contents
