System Parameters - Proxim ORiNOCO AP-700 User Manual

Command Line Interface (CLI)
Parameter Tables

System Parameters

Name
System
Name
Location
Contact Name
Contact E-mail
Contact Phone
FLASH Backup Interval
Flash Update
System OID
Descriptor
Up Time
Emergency Restore to
defaults
Inventory Management Information
Name
System Inventory
Management
Component Table
Component Interface
Table
NOTE: The inventory management commands display advanced information about the AP's installed components. You
may be asked to report this information to a representative if you contact customer support.
Type
Group N/A
DisplayString User Defined
DisplayString User Defined
DisplayString User Defined
DisplayString User Defined
DisplayString User Defined
max 254 characters
Integer 0 - 65535 seconds
0
1
DisplayString N/A
DisplayString System Name, flash
version, S/N, bootloader
version
Integer dd:hh:mm:ss
dd - days
hh - hours
mm - minutes
ss - seconds
Resets all parameters to
default factory values
Type
Subgroup N/A
Subgroup N/A
Subgroup N/A
Value Access
R
RW
RW
RW
RW
RW
RW
RW
R
R
R
RW
Value Access
R
R
R
AP-700 User Guide
CLI Parameter
system
sysname
sysloc
sysctname
sysctemail
sysctphone
sysflashbckint
sysflashupdate
sysoid
sysdescr
sysuptime
sysresettodefaults
Note: You must enter the
following command twice to
reset to defaults:
set sysresettodefaults 1
CLI Parameter
sysinvmgmt
sysinvmgmtcmptbl
sysinvmgmtcmpiftbl
176