Figure 8-34 Removing The System Board - Sun Microsystems SPARCstation 20 Service Manual

Metal cable clips
on chassis wall
System
board
FIGURE 8-34
7. Disconnect the following (
a. The SCSI data cable from the metal cable clips on the chassis wall, and from
the plastic cable clips on the card guide.
b. The DC power harness from the SCSI backplane.
c. The internal SCSI data cable from the SCSI backplane.
8. Remove the SCSI data cable.
Removing the System Board
FIGURE 8-33
Card guide
):
Chapter 8 Removing and Installing Subassemblies 95