Vehicle Controls; Key-Switch; Forward-Off-Reverse Switch; Accelerator Pedal - Taylor-Dunn RE-380-36 Operator's And Service Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

VEHICLE CONTROLS

Key-Switch

A key-switch, located on the right side of the instrument panel, turns on the
vehicle. Rotate the key clockwise to turn the vehicle power on,
counterclockwise to turn the vehicle power off.
The key-switch should be in the "OFF" position whenever the operator leaves
the driver's seat.
This switch is also designed to secure and disable the vehicle. The key can
only be removed when the key-switch is in the "OFF" position.

Forward-Off-Reverse Switch

The forward-Off-reverse switch, located on the right side of the instrument
panel, determines the direction of travel of the vehicle. Push the top of the
switch to engage the forward direction. Push the bottom of the switch to
engage the reverse direction.
DO NOT SHIFT from forward to reverse or vice-versa while the vehicle is in
motion. Make sure the vehicle is completely stopped before shifting.
The forward-reverse switch should be in the center "OFF" position, with
key-switch off and the park brake set whenever the operator leaves the
driver's seat.

Accelerator Pedal

The accelerator pedal is located to the right of the brake pedal. It controls
the speed of the vehicle and operates similar to the accelerator pedal in an
automobile. Depress the pedal to increase speed and release the pedal to
decrease speed.

Steering

The steering wheel and steering system are similar to an automobile. To
turn right, turn the steering wheel clockwise. To turn left, turn the steering
wheel counter-clockwise.

Foot Brake Pedal

The foot brake pedal, is located to the right of the steering column, it is for
operation with the right foot only. It works similar to the brake in an automobile.
Applying pressure to the brake pedal slows the vehicle according to the
amount of pressure applied. Relieving pressure from the pedal releases the
braking action.
Safety Rules
Page 4