Recharging - AMX MVP-9000i Operation And Reference Manual

Accessories

Recharging

To recharge the MVP-9000i:
1.
Slide the device into the Wall Docking Station cradle bottom-first and make sure the device is fully seated in the
Docking Station (FIG. 12).
MVP-9000i
MVP-WDS-9
FIG. 12 Inserting the MVP-9000i into the MVP-WDS-9
2.
Press the top of the MVP-9000i back until it clicks. The touch panel is now locked into the Docking Station, and the
station will automatically charge the device's battery. (Please refer to the Power Management Page section on
page 47 to check on the battery charge status.)
3.
To release the touch panel, unlock the touch panel and wait for the Wall Docking Station to pivot the touch panel
away from the wall (FIG. 20).
16 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom